Eclipse CUT45 CI Commercial / Industrial 45A Plasma Cutter PP45


NEW!! this machine is now fitted with our new DuraSlice 80 torch for greater consumable life - increasing the cutting thickness, reliability, speed, and safety even further.

Click here for a printable PDF User Manual for this machine.

The PlasmaPart catalogue pages for this machine can be seen here

PlasmaPart Eclipse CUT 45 CI Plasma Cutter & 5 Year commercial & domestic warranty

This machine is designed for heavy industrial use and comes with an industry leading 5 year commercial and domestic use warranty. It features a 100% duty cycle at full power allowing huge amounts of cutting to be performed with no worry of the machine overheating. No other machine is available with this combination of specification, cutting ability, warranty and price.

The machine is supplied with a fully comprehensive pick up and return 5 Year UK warranty as standard - and is CE Certified.

Each machine undergoes a full test and inspection before it is dispatched ensuring the best reliability and performance for you. As well as this each machine is UK PAT tested during its inspection and is labeled as such - enabling you to put this machine straight to work in your business or workshop.

The machine has a full power mechanical pilot arc start type torch making easy perfect starts every time and accurate starting points on the material - the pilot arc allows reliable cutting on rust and paint as well as mesh and perforated materials as well as all other metallic materials.

Clean cutting is up to around 16mm in steel plate and with a steady hand severance cuts can be made in steel up to around 21mm!

This machine will cut all metallic materials including copper and aluminium. Cutting thickness is slightly reduced in materials such as aluminium and copper due to their higher thermal conductivity than steel.

The machine is very efficient and has an industry leading duty cycle of 100% @ 45 Amps (full power) at an ambient temperature of 25 degrees centigrade. It features the latest MOSFET Inverter technology using very high quality Toshiba MOSFETS and is force air cooled. The machine is single phase.

Cutting amperage is infinitely variable, and the unit is electronically protected from overload as well as short circuit etc etc.

The machine is fitted with a high quality DuraSlice P80 torch as standard it is of 6m length. Also included are a pack of consumables, air regulator / filter, shade no. 5 safety glasses, earth lead and full instructions.

Each machine is supplied with full instructions including an information pack - to allow you to get started as quickly as possible and gain the knowledge required very quickly - it is also a useful reference guide for plasma cutting.

Add to Cart:

  • Model: PP45
  • Manufactured by: PlasmaPart

Qty Discounts Off Price
Protected by Secured By QuickSSL and Trustico
Copyright © 2017 Powered by Zen Cart
Design by Thomas     Coding/realisation by Edwin Quail